Widespan Gravity Flow Oil Rack

Roll over image to zoom in.

Contact to Order

Download PDF Print

Product Details

Shelving configuration supported by Widespan Uprites 30″, 36″, or 48″ deep
Utilizes Widespan Low Profile Beams installed offset. Rear beam is installed higher (See chart below with available offsets for respective depth and downslant angle)
Widespan Low Profile Beams available 48″W or 60″W
Optional Widespan Dividers and Widespan Gravity Flow Fronts install on shelf wires to separate and contain merchandise

How to Order

Order Widespan Uprites separately 30″, 36″, or 48″ deep in desired height (two required per individual section run and one additional for add-on sections)
Order two 48″W or 60″W Widespan or Multifunction Low Profile beams per shelf level. A minimum of two beam levels is required per section. Required beam levels can include a combination of Gravity Flow levels and Flat levels. A beam must be installed within 6″ of the floor and maximum spacing between beams is 48″.
Order one Widespan Gravity Wire Shelf for each Gravity Flow level (See chart offset and respective angle)
Order one Widespan Flat Wire shelf for each desired flat level
Order five Low Profile Gravity Supports or five Low Profile Flat Shelf Supports per level
Order desired number of 3″H Widespan Dividers
Order desired number of 3″H or 6″H Widespan or Multifunction Gravity Flow Fronts
Order Widespan Floor Anchor (optional)

System Depth	Offset (Inches)	Downslant Angle (deg.)
30	6	11.5
30	8	15.2
36	6	9.5
36	8	12.7
48	8	9.5
48	10	11.9

Exploded view of Widespan Rack assembly showing labeled components

COMPONENTS (ORDER SEPARATELY):

A – Widespan Uprite Frame (30″D, 36″D or 48″D) #WSU_
B – Widespan Low Profile Beam (two per shelf level 48″W or 60″W) #WSLB_PK4
C – Widespan Gravity Low Profile Shelf Supports #WSGSSL_PK5
D – Widespan Flat Level Low Profile Shelf Supports #WSSSL_PK5
E – Widespan Gravity Wire Grid Shelf #WSGW_1EA
F – Widespan Flat Wire Grid Shelf #WSW_1EA
G – Widespan Divider (30″D, 36″D or 48″D) #WSGFD_PK25
H – Widespan Gravity Flow Front (3″H or 6″H) #WSGFF_Pk6
I – Widespan Floor Anchor (optional) #WS1241

Widespan Uprite Frame (One-Piece 48"H - 120"H)

Product Details

One-piece Uprite Frames for units 48” – 120”
Uprite post slotted on face, allows shelf adjustment 2” on center
Square holes punched on sides of Uprite post for accessories
Accessory holes punched 6” on center on face of Uprite also aid beam placement
Top Caps included on each Uprite
One Frame required for each section, plus one at end of each run
To provide increased protection under harsh shipping conditions add “SPC” to part number for additional packaging
Floor Anchors, Floor Protectors, or Back to Back Connectors may be ordered separately
Evenly distributed load of 10,000 lbs per Uprite Frame at 48″ max. Beam spacing, vertically

REINFORCED UPRITE FRAME

“RE” Frame available in 72” – 120”H and all depths (lower Frame only on 132” – 192”)
For use with hand loader/stacker
Reduces chance of Frame damage
Channel welded inside each post in lower 48”
Welded foot plate for anchoring, 1/2” hole

Save

View product details

Product Options and Numbers

Example Part #: WSU 18 048 RE SPC PLT

Widespan Uprite : WSU

Depth: 18”, 24”, 30”, 36”, 42”, 48”

Height: 048”, 060”, 072”, 084”, 096”, 120”

Reinforced Uprite for Hand Loader/ Stacker Applications: RE, Leave blank if not applicable

Additional Packaging: SPC, Leave blank if not applicable

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	-Platinum

Widespan/Multi-Function Low Profile Gravity Flow/Flat Beam

Product Details

Available Widespan or Multi-Function style
2 1/2H profile
Accepts gravity flow or flat shelf supports/shelves
600lb capacity
Same beam used for flat or gravity flow application

View product details

Product Options and Numbers

Example Part #: WS LB 48 PK4 PLT

Beam Type: WS (Widespan), MF (Multi-Function)

Low Profile Beam: LB

Beam Width: 48”, 60”

Unit of Measure: PK4

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum
PK4	– 4-Pack

Widespan Low Profile Shelf Support

Product Details

Available Flat or Gravity Feed
Five (5) reqiured per beam level

View product details

Product Options and Numbers

Example Part #: WS G SS L 30 6 PK5 PLT

System: WS (Widespan)

Flat or Gravity: Omit (Flat), G (gravity)

Shelf Support: SS

Low Profile: L

Widespan Depth: 30″, 36″, 48″

Beam Offset: 6 or 8 (30D), 6 or 8 (36D), 8 or 10 (48D), Omit for Flat

Unit of Measure: PK5

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum
PK5	– 5-Pack

Widespan/Multi-Function Gravity/Flat Wire Shelf

Product Details

Available Widespan or Multifunction style
Available Flat or Gravity Feed

View product details

Product Options and Numbers

Example Part #: WS GW 30 48 1EA

Beam Type: WS (Widespan), MF (Multi-Function) style

Flat or Gravity: W (flat), GW (gravity)

Widespan Depth: 30″, 36″, 48”

Section Width: 48″, 60″

Grid Spacing: 1″

Unit of Measure: EA

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum
EA	– Each

Widespan Dividers

Product Details

Creates lanes for Gravity Flow wire shelf levels
Tension attachment to Gravity Wire Shelf
3″ High

View product details

Product Options and Numbers

Example Part #: WSGFD 48 PK25 PLT

Widespan Gravity Feed Divider: WSGFD

Widespan Depth: 30″, 36″, 48“

Unit of Measure: PK25

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PK25	– 25 Pack
PLT	– Platinum

Widespan/Multi-Function Gravity Flow Fronts

Product Details

Provides product stop for Gravity Feed
3” and 6” heights
Select Front size taller than displayed product’s center of gravity

View product details

Product Options and Numbers

Example Part #: WSGFF 5 3 PK6 PLT

System: WS (Widespan), MF (Multi-Function)

Gravity Feed Front: GFF

Section Width: 4′, 5′

Front Height: 3″, 6″

Unit of Measure: PK6

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum
PK6	– 6 Pack

Widespan Floor Anchor

Product Details

Heavy gauge steel angle fastens Uprite Frame to floor
Required when height-to-depth ratio exceeds 6 to 1
Use as required to meet seismic anchoring specifications
Uprite mounting hardware included
Anchor bolt not included

View product details

Product Options and Numbers

Example Part #: WS1241 GLV

Widespan Floor Anchor: WS1241

Standard Finish: GLV

Suffix Key
GLV	– Galvanized