S-Series Storage Shelving Back Panels

Part Number: SSBP_

S-Series Back Panel can be used to stabilize S-Series Shelving. Use on back of section to create a closed or “closet” section.

Part Number: SSBP_

S-Series Back Panel can be used to stabilize S-Series Shelving. Use on back of section to create a closed or “closet” section.

Roll over image to zoom in.

Contact to Order

Download PDF Print Email Installation Instructions

1/8″ Hardboard, unfinished
108″ – 144″ Backs are two-pieces joined with a Splicer
Notched to accept Back-to-Back Connectors
Can use on back of each section to create a closed or “closet” section
Back Panels (or Crossbraces) are required on ends of each run and every fourth section in between for stabilization
See diagram below for minimum recommended placement of Back Panels per run
Components include Back Panel(s), Screws, Washers and Splicer (ordered separately)

MINIMUM BRACING REQUIREMENTS DIAGRAM

crossbrace diagram

Back Panel component requirements vary by Section Height. See chart below to determine part numbers and quantities needed for each section.

BACK PANEL COMPONENTS BY SECTION HEIGHT
SECTION HEIGHT	36″W SECTION BACK PANEL QTY	48″W SECTION BACK PANEL QTY	WASHER (SS1511 N/A) QTY	SCREW (SS2221 N/A) QTY	SPLICER (SS1151 XB1) QTY
36″	1 (SSBP36036)	1 (SSBP48036)	4	4	–
48″	1 (SSBP36048)	1 (SSBP48048)	4	4	–
60″	1 (SSBP36060)	1 (SSBP48060)	6	6	–
72″	1 (SSBP36072)	1 (SSBP48072)	8	8	–
84″	1 (SSBP36084)	1 (SSBP48084)	8	8	–
96″	1 (SSBP36096)	1 (SSBP48096)	8	8	–
108″	1 (SSBP36084) + 1 (SSEBP36024)	1 (SSBP48084) + 1 (SSEBP48024)	12	12	1
120″	1 (SSBP36084) + 1 (SSEBP36036)	1 (SSBP48084) + 1 (SSEBP48036)	12	12	1
144″	1 (SSBP36072) + 1 (SSEBP36072)	1 (SSBP48072) + 1 (SSEBP48072)	16	16	1

Back Panel Standard Finish: N/A (no finish)

Assembly Height	# of Screws Required to Connect Uprites
36″ – 72″	2
84″ – 108″	3
120″ – 144″	4

S-Series Storage Shelving

Suffix Key
XB1	– White Plastic

Suffix Key
N/A	– No Finish

Suffix Key
N/A	– No Finish