https://www.lozierproducts.com/products/modifications/gondola-extensions/wall-and-island-extension-sections/
Back to All Products  |   You are in: Lozier Products   >   Products   >   Wall and Island Extension Sections

Wall and Island Extension Sections

Add height to your Wall or Island Gondola with an Extension Section. Each Extension Section includes the appropriate number of Uprites, Backs, and Rails to create your section. One end uprite is required for any run length that includes Extension Sections.

Wall and Island Extension Sections

Add height to your Wall or Island Gondola with an Extension Section. Each Extension Section includes the appropriate number of Uprites, Backs, and Rails to create your section. One end uprite is required for any run length that includes Extension Sections.

Lozier Wall and Island Extension Section Gondola Shelving
  • Lozier Wall and Island Extension Section Gondola Shelving

Roll over image to zoom in.

Contact to Order
Download PDF Print Email

Product Details

  • Use on existing Island or Wall sections to make taller
  • One Extension End required for any length run
  • Extension uprite and two uprite end trim required to finish the run

ISLAND EXTENSION INCLUDES (ordered separately)

  • 1 Extension Uprite
  • Back Extensions for both sides same height as extension uprite (See Back Extension section)
  • 2 Top Rails (plus 1 Center Rail if 36″H or over)

WALL EXTENSION INCLUDES (ordered separately)

  • 1 Extension Uprite
  • Back Extension for one side same height as extension uprite.. (See back extension section)
  • 2 Top Rails (plus 1 Center Rail if 36″H or over)

How to Order

 

Suffix Key
PLT – Platinum



Extension Uprite

Product Details

  • Factory-installed connector to fit Lozier Uprites
  • Unbalanced load capacity of 2,500 in-lbs
    • This load capacity is considerably less than the capacity of a standard Uprite. Do not exceed this unbalanced load. Overloading could cause the Uprite to tip over or collapse, resulting in personal injury or property damage.
  • Heavy Duty Extensions must be used with Heavy Duty Uprites

 

View product details

Product Options and Numbers

Example Part #:   U   36   E   PLT

 

Uprite: U, UH

Height: 6″, 12″, 18″, 24″, 30″, 36″, 42″, 48″

UH Height: 6″, 12″, 18″, 24″

Extension: E

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum
UH – Heavy Duty

Uprite and Extension Uprite End Trim

Product Details

  • One-piece trim (Two-pieces if 102”-144”H) snaps onto first and last Uprite or Extension Uprite in a run
  • Can be used on both sides of Extension Uprites where Extension Backs are not used
View product details

Product Options and Numbers

Example Part #:   UET   48    PLT

 

Uprite/Extension Uprite End Trim: UET

Height: 6″, 12″, 18”, 24”, 30” 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96”, 102”, 108”, 114”, 120”

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum

Hardboard Backs

Product Details

  • Use one-piece Backs for heights 36”-72”
  • For heights above 72” order 2 backs, see table below
  • Pegboard 9/32” diameter holes, 1” on center
  • To order the correct size Back, take Uprite height minus 6
View product details

Product Options and Numbers

 Section Heights: 78″-120″
Use 2-Piece Backs
Uprite Height
 Order Backs
78″ BE_36 + BE_36
84″ BE_30 + BE_48
90″ BE_36 + BE_48
96″ BE_42 + BE_48
102″ BE_66 + BE_30
108″ BE_66 + BE_36
114″ BE_66 + BE_42
120″ BE_66 + BE_48
Actual Back Height Information
Uprite Height
 Nominal Back Height
 Actual Height
30″ 24″ 23 13/16″
36″ 30″ 29 13/16″
42″ 36″ 35 13/16″
48″ 42″ 41 13/16″
54″ 48″ 47 13/16″
60″ 54″ 53 13/16″
66″ 60″ 59 13/16″
72″ 66″ 65 13/16″
Actual Width Information
Nominal Width
 Actual Width
6″ 4 17/32″
12″ 10 17/32″
16″ 14 17/32″
18″ 16 17/32″
24″ 22 17/32″
30″ 28 17/32″
32″ 30 17/32″
36″ 34 17/32″
42″ 40 17/32″
48″ 46 17/32″
Actual Back Height for Extension Uprite
Uprite Height
 Actual Height
6″ 5 13/16″
12″ 11 13/16″
18″ 17 13/16″
24″ 23 13/16″
30″ 29 13/16″
36″ 35 13/16″
42″ 41 13/16″
48″ 47 13/16″

Top Rail

Product Details

  • All Island and Wall Sections require one Top, Center and Bottom Rail
  • 2’ and 30” sections use two Top Rails to make a Splicer Rail
  • Electrical knockouts included on all Rails
View product details

Product Options and Numbers

Example Part #:   R   4   T   PLT

 

Rails: R

Width: 2’, 30”, 3’, 4’

Top Rail: T

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum Color

Bottom Rail

Product Details

  • All Island and Wall Sections require one Top, Center and Bottom Rail
  • Electrical knockouts included on all Rails
  • Also used for 2′ and 30″ Slotwall Backs
View product details

Product Options and Numbers

Example Part #:   R   4   B   PLT

 

Rails: R

Width: 2’, 30”, 3’, 4’

Bottom Rail: B

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum Color

Center Rail

Product Details

  • All Island and Wall Sections require one Top, Center and Bottom Rail
  • 96”H-144”H Backs require two Center Rails
  • Center Rail finish is always N/A because it’s hidden
  • Electrical knockouts included on all Rails
View product details

Product Options and Numbers

Example Part #:   R   4   C   N/A

 

Rails: R

Width: 2’, 30”, 3’, 4’

Center Rail: C

Standard Finish: N/A

Recommended Products

Need Something Different? Let’s Talk.

Work with our design and engineering teams to create fixtures that meet your needs. We have access to a wide variety of materials, colors and capabilities to bring your vision to life.

Learn more

Lozier is here to help.

Check out the Services section for all the services Lozier has to offer.  Have an idea you want to explore? Our design and engineering teams are ready to help.

Learn more