https://www.lozierproducts.com/products/modifications/gondola-extensions/see-thru-island-extension-sections/

See-Thru Island Extension Sections

See Thru Island Extension includes the necessary components to create an open back in the middle of your section.

See-Thru Island Extension Sections

See Thru Island Extension includes the necessary components to create an open back in the middle of your section.

Product Details

  • See-Thru Island Extension creates an opening within a section

SEE-THRU ISLAND EXTENSION INCLUDES (ordered separately)

  • 1 Extension Uprite
  • Two See-Through Extension backs (size = extension uprite height minus opening height)
  • 1 Top Rail (plus 1 Center Rail if 36″H or over)
  • 1 Bottom Rail
  • 2 See-Thru inside uprite end trims desired opening height

 

How to Order

Suffix Key
PLT – Platinum

Extension Uprite

Product Details

  • Factory-installed connector to fit Lozier Uprites
  • Unbalanced load capacity of 2,500 in-lbs
    • This load capacity is considerably less than the capacity of a standard Uprite. Do not exceed this unbalanced load. Overloading could cause the Uprite to tip over or collapse, resulting in personal injury or property damage.
  • Heavy Duty Extensions must be used with Heavy Duty Uprites

 

View product details

Product Options and Numbers

Example Part #:   U   36   E   PLT

 

Uprite: U, UH

Height: 6″, 12″, 18″, 24″, 30″, 36″, 42″, 48″

UH Height: 6″, 12″, 18″, 24″

Extension: E

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum
UH – Heavy Duty

Uprite and Extension Uprite End Trim

Product Details

  • One-piece trim (Two-pieces if 102”-144”H) snaps onto first and last Uprite or Extension Uprite in a run
  • Can be used on both sides of Extension Uprites where Extension Backs are not used
View product details

Product Options and Numbers

Example Part #:   UET   48    PLT

 

Uprite/Extension Uprite End Trim: UET

Height: 6″, 12″, 18”, 24”, 30” 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96”, 102”, 108”, 114”, 120”

Standard Finish:  PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum

See-Thru Inside Uprite End Trim

Product Details

  • Use on both sides of Extension Uprites where Extension Backs are not used

 

View product details

Product Options and Numbers

Example Part #:   SUET   12   PLT

 

See Thru Inside Uprite End Trim: SUET

Opening Height: 6″, 12″, 18″

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum

Hardboard Backs

Product Details

  • Use one-piece Backs for heights 36”-72”
  • For heights above 72” order 2 backs, see table below
  • Pegboard 9/32” diameter holes, 1” on center
  • To order the correct size Back, take Uprite height minus 6
View product details

Product Options and Numbers

 Section Heights: 78″-120″
Use 2-Piece Backs
Uprite Height
Order Backs
78″ BE_36 + BE_36
84″ BE_30 + BE_48
90″ BE_36 + BE_48
96″ BE_42 + BE_48
102″ BE_66 + BE_30
108″ BE_66 + BE_36
114″ BE_66 + BE_42
120″ BE_66 + BE_48
Actual Back Height Information
Uprite Height
Nominal Back Height
Actual Height
30″ 24″ 23 13/16″
36″ 30″ 29 13/16″
42″ 36″ 35 13/16″
48″ 42″ 41 13/16″
54″ 48″ 47 13/16″
60″ 54″ 53 13/16″
66″ 60″ 59 13/16″
72″ 66″ 65 13/16″
Actual Width Information
Nominal Width
Actual Width
6″ 4 17/32″
12″ 10 17/32″
16″ 14 17/32″
18″ 16 17/32″
24″ 22 17/32″
30″ 28 17/32″
32″ 30 17/32″
36″ 34 17/32″
42″ 40 17/32″
48″ 46 17/32″
Actual Back Height for Extension Uprite
Uprite Height
Actual Height
6″ 5 13/16″
12″ 11 13/16″
18″ 17 13/16″
24″ 23 13/16″
30″ 29 13/16″
36″ 35 13/16″
42″ 41 13/16″
48″ 47 13/16″

Top Rail

Product Details

  • All Island and Wall Sections require one Top, Center and Bottom Rail
  • 2’ and 30” sections use two Top Rails to make a Splicer Rail
  • Electrical knockouts included on all Rails
View product details

Product Options and Numbers

Example Part #:   R   4   T   PLT

 

Rails: R

Width: 2’, 30”, 3’, 4’

Top Rail: T

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum Color

Bottom Rail

Product Details

  • All Island and Wall Sections require one Top, Center and Bottom Rail
  • Electrical knockouts included on all Rails
  • Also used for 2′ and 30″ Slotwall Backs
View product details

Product Options and Numbers

Example Part #:   R   4   B   PLT

 

Rails: R

Width: 2’, 30”, 3’, 4’

Bottom Rail: B

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT – Platinum Color

Center Rail

Product Details

  • All Island and Wall Sections require one Top, Center and Bottom Rail
  • 96”H-144”H Backs require two Center Rails
  • Center Rail finish is always N/A because it’s hidden
  • Electrical knockouts included on all Rails
View product details

Product Options and Numbers

Example Part #:   R   4   C   N/A

 

Rails: R

Width: 2’, 30”, 3’, 4’

Center Rail: C

Standard Finish: N/A