No Base Wall End Display

The No Base Wall End Display is a wall end display without base deck components. This End Cap style is ideal for finishing a Gondola run with a bulk display.

No Base Wall End Display

The No Base Wall End Display is a wall end display without base deck components. This End Cap style is ideal for finishing a Gondola run with a bulk display.

Roll over image to zoom in.

Contact to Order

Download PDF Print Email 2D Fixture CAD Blocks 3D Fixture CAD Blocks

Product Details

Wall End Display without a base deck
Attaches to a Lozier Island of equal height
Utilizes Upper and Lower Stabilizer to attach to adjoining island section
Lower stabilizer available in CHR only
Order rear Gap Filler when unit is wider than island
Compatible with 06 and low base island
Shown here with Hardboard Back Panels
Will accept Slotwall Backs, however, different rail combination is required. Contact your Lozier Salesperson

End Cap Width	Minimum Base Deck Depth	Maximum Base Deck Depth
3′	13/13	19/19
4′	13/13	25/25
6′ (two 3′ Sections)	25/25	31/31

NOTE:

All No Base Wall End Displays that are intended for use with Shelves, Peg Hooks, or Slotwall Accessories must include a floor display to direct traffic away from protrusions. Extension Uprites cannot be used on this Display.
No Base Wall End Displays can be centered on Gondolas with many different combinations of unequal Base Deck depths. Contact your Lozier salesperson for allowable combinations.

MAXIMUM LOAD RATING 12,000 IN LBS

How to Order

	COMPONENTS (ORDERED SEPARATELY)	QTY.
A.	Uprite (Standard or Heavy Duty)	2
B.	Top Rail	1
C.	Center Rail (2 per section 96H-120H)	1 or 2
D.	Splicer Rail (Sections 78H-120H) Use 2 top rails for splicer on 2′ and 30″ wide sections.	1
E.	Bottom Rail	1
F.	Back Material (1 or 2 per side)	1 or 2
G.	Wall End Display Stabilizer (includes End Rail and Gondola Rail, also available separately)	1
H.	No Base Wall End Display Lower Stabilizer	1
I.	Uprite End Trim	2
J.	Gap Filler	1

Uprite

Product Details

3/16” thick face channel
1” slotted on center for maximum flexibility
Use for Wall and Island Sections
Steel welded construction
Includes side flanges to retain Back material, leveling leg for uneven floors
Includes Top Caps on Uprites 36”-66”H

uprite diagram

View product details

Product Options and Numbers

Example Part #: U 42 PLT

Uprite: U, UH

U Height: 30”, 36”, 42”, 48”, 54”, 60”, 66”, 72”, 78”, 84”, 90”, 96”, 102”, 108”, 114”, 120”

UH Height: 72”, 78”, 84”, 90”, 96”, 108”, 120”

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum
U	– Uprite
UH	– Heavy Duty Uprite

Top Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
2’ and 30” sections use two Top Rails to make a Splicer Rail
Electrical knockouts included on all Rails

View product details

Product Options and Numbers

Example Part #: R 4 T PLT

Rails: R

Width: 2’, 30”, 3’, 4’

Top Rail: T

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum Color

Center Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
96”H-144”H Backs require two Center Rails
Center Rail finish is always N/A because it’s hidden
Electrical knockouts included on all Rails

View product details

Product Options and Numbers

Example Part #: R 4 C N/A

Rails: R

Width: 2’, 30”, 3’, 4’

Center Rail: C

Standard Finish: N/A

Splicer Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
78”H – 144”H Backs require one Splicer Rail
Splicer rail is not available in 2’ or 30”
Use two top rails for splicer rail on 2′ and 30″ wide sections.
Electrical knockouts included on all Rails

View product details

Product Options and Numbers

Example Part #: R 4 S PLT

Rails: R

Width: 3’, 4’

Splicer Rail: S

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum Color

Bottom Rail

Product Details

All Island and Wall Sections require one Top, Center and Bottom Rail
Electrical knockouts included on all Rails
Also used for 2′ and 30″ Slotwall Backs

View product details

Product Options and Numbers

Example Part #: R 4 B PLT

Rails: R

Width: 2’, 30”, 3’, 4’

Bottom Rail: B

Standard Finish: PLT, Optional Catalog Colors

Suffix Key
PLT	– Platinum Color

Hardboard Backs

Product Details

Use one-piece Backs for heights 36”-72”
For heights above 72” order 2 backs, see table below
Pegboard 9/32” diameter holes, 1” on center
To order the correct size Back, take Uprite height minus 6

View product details

Product Options and Numbers

Section Heights: 78″-120″ Use 2-Piece Backs
Uprite Height	Order Backs
78″	BE_36 + BE_36
84″	BE_30 + BE_48
90″	BE_36 + BE_48
96″	BE_42 + BE_48
102″	BE_66 + BE_30
108″	BE_66 + BE_36
114″	BE_66 + BE_42
120″	BE_66 + BE_48

Actual Back Height Information
Uprite Height	Nominal Back Height	Actual Height
30″	24″	23 13/16″
36″	30″	29 13/16″
42″	36″	35 13/16″
48″	42″	41 13/16″
54″	48″	47 13/16″
60″	54″	53 13/16″
66″	60″	59 13/16″
72″	66″	65 13/16″

Actual Width Information
Nominal Width	Actual Width
6″	4 17/32″
12″	10 17/32″
16″	14 17/32″
18″	16 17/32″
24″	22 17/32″
30″	28 17/32″
32″	30 17/32″
36″	34 17/32″
42″	40 17/32″
48″	46 17/32″

Actual Back Height for Extension Uprite
Uprite Height	Actual Height
6″	5 13/16″
12″	11 13/16″
18″	17 13/16″
24″	23 13/16″
30″	29 13/16″
36″	35 13/16″
42″	41 13/16″
48″	47 13/16″

Wall End Display Stabilizer

Product Details

Anchors freestanding 2′, 30″, 3′, or 4’W Wall End Display to 3′ or 4′ Island Sections
Accommodates up to 9″ offset (3″ increments)
Required when a Wall End Display or Contoured End Display has an unacceptable freestanding
height-to-depth ratio (Levelers exceed 6:1)
Wall End and Gondola End Section Top Rail not required
Stabilizes top of WEDNB (No Base End Cap)

COMPONENTS (ORDERED SEPARATELY):

Wall End Display End Top Rail (WEDER)
Wall End Display Gondola Top Rail (WEDGR)

View product details

Product Options and Numbers